IMPORTANT NOTIcE
PlEASE NOTE ThAT ThE FIRST TOAST cYclE TAKES
APPROXIMATElY 4 MINUTES
1. Put toaster on counter or flat, dry surface near electrical outlet.
2. Place bread in all the slots, set both browning controls and push down the carriage
control levers. The toasted bread will automatically rise when the bread cycle is
complete.
3. The regular slots toast both sides of bread.
4. To stop toasting mid-cycle, just lift up the carriage control lever.
cAUTION: The removable crumb tray must be completely inserted before toaster can be
operated. If the tray is removed for cleaning, ensure that it is replaced before
using toaster. Crumb tray is dishwasher-safe.
let toaster cool before any cleaning operation.
1. To clean outer surface: Let toaster cool. Unplug power cord. Wipe down exterior
with damp cloth. Prevent liquid from running into toaster slots. Before using allow
toaster's outer surface to dry.
2. To clean crumb tray: Remove the crumb tray and discard crumbs. Wipe crumb
tray clean and replace in toaster. Never operate the toaster without the crumb tray
in place. Crumb tray is dishwasher-safe.
3. To remove any pieces of bread remaining in the toaster, unplug toaster, turn the
toaster upside down and gently shake. Never insert any metal or sharp instrument
into the toaster slots. This could damage the toaster and cause a safety hazard.
Operation
Care and Cleaning
4