Troubleshooting - Tripp-Lite B118-002-UHD El Manual Del Propietario

Installation
5 Connect an available Output port on your splitter(s) to the display's
HDMI Input port.
Note: The length of the HDMI cable connecting the splitter to the display
must not exceed 16 ft. (5 m).
6 Repeat Step 5 for the remaining Output ports in the installation.
Connect the included power supply to each splitter in the
7
installation, then plug it into a Tripp Lite Surge Protector, Power
Distribution Unit (PDU) or Uninterruptible Power Supply (UPS).
8 Turn on the power to the HDMI source and displays.

Troubleshooting

If you are unable to obtain an acceptable image after following the
installation instructions, try the troubleshooting tips below:
Press the reset button on the splitter to reset the signal being
1
sent to the connected displays.
Note: The B118-002-UHD does not feature a reset button.
Is the external power supply that came with the product
2
connected and plugged into a working power source? For the
product to function properly, it must be connected to and receiving
power from the external power supply.
Was the power to the connected devices turned off prior to
3
installation? If not, restart them.
What resolution are you trying to obtain? Tripp Lite's UHD
4
4K x 2K HDMI splitters are tested to support video resolutions up
to 3840 x 2160 @ 24 Hz and 30 Hz, at 36-bit Deep Color
(12 bits per channel).
18-04-038-9336A7.indb 6
6
5/11/2018 8:23:28 AM