Removing Of Usb / Memory Card - Lenco TCD-990 Manual De Instrucciones

D) ENCODING BITRATE (BY REMOTE HANDSET)
YOU CAN SELECT THE DESIRED BITRATE DURING ENCODING, THE HIGHER BIT RATE WILL GENERATE
BETTER SOUND QUALITY AND OCCUPY MORE SPACE OF MEMORY. THE SELECTABLE RANGE IS FROM 32 /
64 /96 /128 / 192 / 256 KBPS RESPECTIVELY
1) SET IN " PHONO " FUNCTION (6) & REMAIN STOP MODE.
2) PRESS THE " INFO " FUNCTION AND THE LCD DISPLA (2) WILL SHOW THE DEFAULT BITRATE (128 KBPS)
3) PRESS SKIP
4) PRESS AGAIN THE " INFO " TO CONFIRM THE SETTING AND THE LCD DISPLAY (2) WILL RESUME TO
" PHONO " MODE
E) TRACK SEPARATION (BY REMOTE HANDSET)
YOU CAN DIVIDE THE RECORDING MUSIC FROM PHONO OR TAPE TO USB/SD TRACK BY TRACE DURING
ENCODING. EVERY TIME WHEN PRESS THE "
HANDSET DURING ENCODING FROM PHONO OR TAPE TO USB/SD, THE SYSTEM WILL GENERATE A NEW
TRACK AND CONTINUOUS THE RECRODING. THE TEXT " PHONO " OR " TAPE " AT LCD DISPLAY (2) WILL
FLASHING ONE TIME, IT MEAN THE UNIT IS CREATING A NEW TRACK SUCCESSFULLY.
FILE DELETE AT USB/SD (BY REMOTE HANDSET)
THE SYSTEM IS ABLE TO ERASE THE FILE STORED INSIDE THE USB PEN DRIVE OR SD CARD BY
FOLLOWING:-
I) SINGLE FILE DELETE
1. SELECT AT " USB " OR " SD " MODE.
2. PRESS AND HOLD THE " INFO " BUTTON FOR 3 SECONDS AND THE LCD DISPLAY (2) WILL SHOW (DEL
---001)
3. PRESS SKIP FORWARD
4. PRESS THE " REC " BUTTON TO ENTER " YES / NO " MODE AND THEN PRESS SKIP FORWARD
SKIP BACKWARD
5. PRESS THE " REC " BUTTON AGAIN TO CONFIRM THE SETTING.
II) ALL FILES DELETE (BY REMOTE CONTROL)
1. SELECT AT " USB " OR " SD " MODE.
2. PRESS AND HOLD THE " INFO " BUTTON FOR 3 SECONDS AND THE LCD DISPLAY (2) WILL SHOW (DEL
---001)
3. PRESS AND HOLD THE " INFO " BUTTON AGAIN AND THE LCD WILL SHOW " FORMAT / Y/N " AND
FLASHING. THEN PRESS SKIP FORWARD
".
4. PRESS THE " REC " BUTTON AGAIN TO CONFIRM THE SETTING.
REMARK :
- ALL THE FILES INSIDE THE USB STORAGE MEDIA OR SD CARD WILL BE DELETED COMPLETELY AFTER
CONFIRMING TO " Y (YES) " MODE.
- PRESS " STOP " BUTTON ONCE AT REMOTE HANDSET TO QUITE DELETE MODE

REMOVING OF USB / MEMORY CARD

TO REMOVE THE USB / MEMORY CARD, TURN OFF THE POWER OR SWITCH THE FUNCTION MODE TO
EITHER CD, TAPE OR TUNER FIRST. FOR USB PORT – UN-PLUG IT BY PULLING OUT THE USB SOCKET
DIRECTLY, FOR MEMORY CARD – PRESS THE MEMORY CARD INWARD & THEN RELEASE, NOW THE CARD
BEING PARTIALLY EJECT AND YOU CAN REMOVE IT BY HAND.
X-BASS SOUND EFFECT
PRESS THE X-BASS BUTTON (17) TO ACTIVE X-BASS FUNCTION AND EHNANCE THE BASS EFFECT AT " ON
" POSTION.
OR BUTTONS (13,24) TO SELECT THE DESIRE BITRATE FOR ENCODING.
OR SKIP BACKWARD
TO SELECT " YES " OR " NO ".
" (TRACK SEPARATION) BUTTON ONCE AT REMOTE
BUTTON TO SELECT THE FILE GOING TO DELETE
OR SKIP BACKWARD
GB-7
TO SELECT " Y (YES) " OR " N (NO)
OR