Tabla de contenido
DJI RS 2 Quick Start Guide
Operation
After balancing, make sure the three axes are unlocked before powering on DJI RS 2.
Touchscreen
Auto-Tune: after balancing, DJI RS 2 must be auto-tuned before it can be used. Tap
the icon to enter auto-tune page. If the lens-fastening strap is installed, you can enable
SuperSmooth prior to auto-tune for the best performance.
Balance Status: tap to check the balance status.
Follow Mode: tap to select follow mode. The tilt motor controls the tilt axis to follow,
pan motor controls the pan axis to follow, and roll motor controls the roll axis to follow.
PF: pan follow, where only the pan axis follows the grip's movements.
PTF: pan and tilt follow, where both the pan and tilt axes follow the grip's
movements.
FPV: pan, tilt and roll follow, where all three axes follow the grip's movements.
3D Roll 360: enable to shoot footage while rotating the camera 360°.
Portrait: enable to shoot in portrait mode.
Custom: enable or disable any axis follow as required.
Follow Speed: tap to select follow speed.
Navigating the Screen
High
Joystick Speed
Joystick Smoothness
30
Dial Functions
Dial Speed
Slide up on the screen
to enter the joystick
and front dial settings
page.
©
10
2020 DJI OSMO All Rights Reserved.
PTF
Fast
Home
100
Slide down on the
screen to view the
image transmission
(with the Image
Transmission System
mounted).
100
Silent Mode
Push Mode
Disable Selfie
Slide left on the screen
to set system settings.
Timelapse
Track
Panorama
Time Tunnel
Slide right on the
screen to select
shooting modes.
Tabla de contenido
