Tabla de contenido
Idiomas disponibles
Idiomas disponibles
UPRIGHT POSITION
Parts:
1. Power switch: Turn on the heater with indicator. "0"- Off "I" - On
2. On/Off
button: Push " " Button to turn on heating function.
3. Timer button: Used to set hour value for the timer.
4. Temp. + button: To increase desired temperature
5. Temp. - button: To decrease desired temperature
6. Digital display: Indicates set room temperature or time.
PRE-OPERATING INSTRUCTIONS:
Press the Power button to allow the heating process to stop. The fan will continue to
blow for approximately 1 minute to allow for the interior components to cool. Once
the Fan is cooled the digital display will show "—". You may know turn off the Power
from "I" to "0".
OPERATING INSTRUCTIONS:
Plug the heater into a suitable power outlet. The heater must be positioned upright
1.
(Control panel is at the top). Press the bottom under the plug and move the prongs to
the same direction as your wall plug. The distance between the heater bottom and
the ground should be more than 1ft/30cm, the distance between the side of the
heater and the opposite wall or any other object should be more than 1.5ft/50cm.
Make sure the Heater is not hanging out of the plug.
4
Tabla de contenido
