Tabla de contenido
Chapter 2
Avaya EBC240 Site Preparation, Installation and Operator's Manual
Safety Warnings
This manual contains important instructions for the EBC240 that should
be followed during installation and maintenance of the UPS and
batteries.
The EBC240 uses two AC power cords rated at 120 Vac, 6A each. Both
must be connected for the batteries to charge.
DO NOT use any other sizes or types of batteries with the EBC240.
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
This manual contains important instructions that you should follow during installation and
maintenance of the UPS and batteries. Please read all instructions before operating the
equipment and save this manual for future reference.
S
Only qualified service personnel (such as a licensed electrician) should perform the
EBC240 installation. Risk of electrical shock.
S
To reduce the risk of fire, connect both AC power cords only to a single circuit provided
with 15A maximum branch circuit overload protection in accordance with the National
Electrical Code, ANSI/NFPA 70.
S
Never dispose of batteries in a fire. Batteries may explode when exposed to flame. In the
event of a fire involving the UPS and its batteries, use only carbon dioxide fire
extinguishers or those approved for use in electrical fire fighting.
S
Servicing should be performed by qualified service personnel knowledgeable of batteries
and required precautions. Keep unauthorized personnel away from batteries.
S
Do not open or mutilate the battery or batteries. Released electrolyte is harmful to the
skin and eyes and may be extremely toxic.
S
Batteries can present a risk of electrical shock or burn from high short-circuit current,
fire, or explosion from vented gases. Observe proper precautions.
S
Proper disposal of batteries is required. Refer to your local codes for disposal
requirements.
D A N G E R
C A U T I O N
S
164201531 Rev C
3
Tabla de contenido
