Xiaomi AX1800 Guia De Inicio Rapido página 8

English
FAQ
I have finished se ing up my network. Why can't I connect to the Internet?
Step 1:
Use your phone to search for the Wi-Fi network set by your router. If you can't find it, make sure that
the router is connected to the power and has finished booting up
Step 2:
Connect your phone to your router's Wi-Fi network, go to router.miwifi.com", and try to fix the
problem based on the network diagnostics results
I've forgo en the administrator password for my router. What should I do?
If you haven't set a specific password, your administrator password will be the same as your Wi-Fi password,
so try using this to log in. If the problem persists, it is recommended that you restore your router to the factory
se ings, then set up the network again
How do I restore my router to the factory se ings?
First make sure that the router has finished booting up, then hold down the Reset bu on at the base of the
router for more than 5 seconds and let go when the system status light turns orange. When the router finishes
booting up again, the reset was successful
What do the different indicator lights mean on the router?
System status light
Network status light
Network status indicator Internet
Off
Orange
Blue
System status indicator System
Off
Orange
Blue
6
two colors (blue and orange)
The network cable is not plugged into the WAN port
Constant: The network cable is plugged into the WAN port
but the upstream network is not available
Constant: The network cable is plugged into the WAN port
and the upstream network is available
two colors (blue and orange)
Not connected to power supply
flashing: System update in progress
Constant (turns blue a er approx. 1 minute): The system is starting
Constant (does not turn blue a er approx. 2 minutes): System fault
Constant: Working normally