Schlage Control FE410F Instrucciones Para La Instalación página 5

5b Secure the inside cover with two screws.
6
Install the levers.
6a Install the lever on the inside of the door.
6b Install the lever on the outside of the door.
Press lever catch
in, then push
lever into place.
Actual Size (2)
Press lever catch
in, then push
lever into place.
7
Test the lock.
7a Extend and then retract the bolt using the inside bolt
throw.
Bolt should extend and
retract smoothly.
L Outside bolt throw should spin freely until a valid
credential is presented.
7b Extend the bolt using the bolt throw and then rotate the
inside lever.
Bolt should retract.
Latch should retract.
7c Rotate the outside lever.
If the lock did not operate as described, please see
Troubleshooting.
Latch should retract.