Tabla de contenido
Hand Switch
Interruptor manual
Panneau de commande
1. Product Outline / Descripción del producto / Aspect du produit
LED Display
Pantalla LED
Écran LED
2. Product Specification
Button introduction: There are seven buttons that "▲" , "▼" , "1" , "2" , " " " " "M"
(1) "▲" : Adjust the desk upwards
(2) "▼" : Adjust the desk downwards
(3) " 1 " : Position 1, first height position saved by the user
(4) " 2 " : Position 2, second height position saved by the user
(5) " " : the display shows "3", which means the position of the standing height the user saved.
(6) " " : the display shows "4", which means the position of the standing height the user saved.
(7) "M" : Height saving button, for height memory function; Child lock: for security
2. Especificaciones del producto
Presentación de los botones - Hay siete botones: "▲" , "▼" , "1" , "2" ," " " " "M"
(1) "▲" : Ajusta el escritorio hacia arriba
(2) "▼" : Ajusta el escritorio hacia abajo
(3) " 1 " : Posición 1, primer ajuste de altura guardado por el usuario
(4) " 2 " : Posición 2, segundo ajuste de altura guardado por el usuario
(5) " " : La pantalla muestra "3" para indicar la posición de altura en pie guardada por el usuario.
(6) " " : La pantalla muestra "4" para indicar la posición de altura en pie guardada por el usuario.
(7) "M" : Botón para guardar la altura para la función de memoria de altura; Bloqueo infantil: Por seguridad
2. Spécifications du produit
Présentation des boutons : L'appareil compte 7 boutons : "▲", "▼", "1", "2", " " " "M"
(1) "▲" : Monter le plateau
(2) "▼" : Descendre le plateau
(3) "1" : Position 1, première hauteur sauvegardée par l'utilisateur
(4) "2" : Position 2, deuxième hauteur sauvegardée par l'utilisateur
(5) " " : l'écran affiche 3, c'est-à-dire la position de la hauteur sauvegardée par l'utilisateur.
(6) " " : l'écran affiche 4, c'est-à-dire la position de la hauteur sauvegardée par l'utilisateur.
(7) "M" : Bouton de sauvegarde de la hauteur dans la fonction de mémorisation. Bouton de la fonction de
verrouillage enfant.
3. Operating Instructions
●
Child lock function:
a. When the child lock is turned on, the child lock blue indicator light (▼ and M directly above) lights up.
b. Press the button indicator to flash once.
c. To unlock or start the child lock, you need to press and hold the M button for about 5seconds.
d. Only when the child lock is unlocked, all the buttons can work normally.
●
Height Adjustable Function:
Press the"▲" or "▼" button to adjust the height. The LED display shows the current height.
●
Height Memory Function:
a. Press UP or DOWN button and adjust the height to the desired height. Press "M" to save the height, and
the screen will display "
";
Press "1" , "2" ,or " " , " " then, that is, save the height to the corresponding position 1 or 2 3, or 4, which
will show in the display screen as "
" ,"
", or "
", or "
";
b. Press "1", "2" and " " , " " button directly to automatically adjust the memory height you saved.
● Anti-collision sensitivity adjustment :
a. Press and hold the "▲" "▼" button for 5 seconds at the same time to switch the sensitivity. Switch one
file for 1 time and divide it into 4 files (A-3, A-2, A-1, A-0);
b. The display shows "
" , the anti-collision function is off; the display shows "
shows "
", medium sensitivity; display shows"
", high sensitivity; (factory default is A-3);
c. During height adjustment, when tabletop comes in contact with another object, it instantly stops and
reverses to avoid damage.
●
Troubleshooting:
a. If the switch panel shows the "E01", that means the desk has been operated for too long time. The desk
could be operated again after 13mins of wait (stop).
b. If the switch panel shows the "E02", that means the desk has been operated for too long time, causing the
over heated in the control box. The desk could be operated again after 25mins of wait (stop).
c. If the switch panel shows the "E03" and "E04", please make sure the desk is not over capacity. If it's over
capacity, please remove the weight capacity on the desktop, and then keep pressing the "▼" to reset. If not
over capacity, please directly keep pressing the "▼" to reset the desk.
d. If the switch panel shows the "E05", "E06" and "E10", please make sure the desk frame is not stuck, and
then keep pressing the "▼" to reset.
e. If the switch panel shows the "E07", "E08", "E20", "E21", "E22" or "E23", please make sure the wires are in
good connection. We could connect all wires again, and then keep pressing the "▼" to reset.
", low sensitivity; Display
17
Tabla de contenido
