THERMEx VALENCE Instrucciones De Montaje página 71

M 528234001218112015
7
IInstall the vent pipe onto the hood. Be
sure that the none-return valve can open
freely.
NOTE: This is only needed when using a
vent to the outside.
9
Attach the two plates on the motor
frame. Where plates are mounted on the
motor frame determines the height of
the hood.
THERMEX VALENCE 71
8
Remove the lower part of the frame from
the lower part of the hood by unscrewing
the 4 screws located under the cover.
10
NOTE: The plates must sit on the outside
of the motor frame, but the screws must
be screwed in from the inside and out.
x4
x4