Electromagnetic Fields (Emf); Preparing For Use - Philips 5000 Serie Manual De Instrucciones

Ocultar thumbs Ver también para 5000 Serie:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 40
-
Never use compressed air, scouring pads, abrasive cleaning agents or
aggressive liquids such as petrol or acetone to clean the appliance.

Electromagnetic fields (EMF)

-
This Philips appliance complies with all applicable standards and
regulations regarding exposure to electromagnetic fields.
General
-
This appliance can be safely cleaned under the tap.
-
The appliance is suitable for mains voltages ranging from 100 to
240 volts.
-
The adapter transforms 100-240 volts to a safe low voltage of less than
24 volts.
-
Maximum noise level: Lc = 75dB(A)

Preparing for use

Charging
Charge the appliance fully and apply a few drops of oil on the trimmer
teeth before you use it for the first time and after a long period of disuse.
Charging takes about 60 minutes if the appliance is completely empty.
1
Make sure the appliance is switched off.
2
Insert the small plug into the appliance and put the adapter in the
wall socket.
, The battery light flashes orange and white alternately.
, After about 3 minutes, the battery light flashes white only.
At this point, the battery contains enough energy for one cordless
trimming session.
ENGLISH
5
Tabla de contenido
loading

Este manual también es adecuado para:

Bt5270/32Bt5262/13Bt5260/33Bt5271/15Bt5270/33Bt5260/32

Tabla de contenido