Install The Ptz Driver - Axis T99A11 Guia De Instalacion

AXIS T99A11 Positioning Unit 24 V AC/DC
6
Sunshield
7
Sunshield screws (2x, T20)
15 Positioning unit back cover screws (2x, T20)
16 Positioning unit back cover
17 Back lid
6. Fasten the positioning unit back cover on the camera with the screws (torque 1.0 Nm).
7. Fasten the sunshield using the screws (torque 1.0 Nm).
8. Remove the SD card lid and insert the microSD card (optional) into the SD card slot in
the camera. Fasten the SD card lid.
9. Fasten the back lid with the screw (T20, torque 1.0 Nm).

Install the PTZ driver

This product supports several devices. For a complete list of supported devices, see axis.com
1. Go to the camera's webpage.
2. In the installation wizard, go to Select a PTZ mode and select PTZ driver from the
drop-down list.
3. Once you've accessed the live view, go to Settings > System > Accessories.
4. Select one of the following actions:
4.1 If the PTZ driver is not uploaded, select Upload driver.
4.2 If the PTZ driver is uploaded, go to Select driver to use and select PTZ driver
from the drop-down list.
31
EN