Honeywell Home VisionPRO 8000 Smart Manual Del Usuario página 10

Overriding schedules: residential use
1 Touch s or t to adjust the temperature
(right side of screen) and the Hold Until
time (left side). The schedule will resume
when the Hold Until time expires.
2 Select Permanent Hold to keep the same
temperature until you change it or
resume the program schedule.
Touch Cancel Hold at any time to resume
the program schedule.
Overriding schedules: commercial use
Touch s or t to adjust the
temperature. It will be maintained until
the hold time you set.
• To change the hold time, touch the Hold
Until arrow buttons. This time can be
adjusted up to the maximum time set by
the installer.
• Touch Override to use a pre-set occupied
temperature if a person uses the room
during an unoccupied period. The new
temperature will be maintained for 1
hour and can be adjusted up to the
maximum time set by the installer.
The programmed schedule will resume
when the override timer expires. Touch
Cancel Hold at any time to resume the
program schedule.
33-00066EFS—05
Temporary Hold
Permanent Hold
8
MCR34103
MCR34169
MCR34106