Connection Lugs; Ground Connection - Wacker G50 Manual De Operación

1A OPERATION

1.20 Connection Lugs

The customer connection lugs
the bottom of the panel behind a hinged door. The lugs
provide connection points for attachment of outside
loads.
A large label like the one shown in section 1.25 Terminal
Connections is attached to the inside of the terminal door.
It shows the correct terminal connections for selected
voltages.
Connections to the lugs should be made by running the
power cables up through the slots
panel and into the lug. Use a 3/8" Allen wrench to tighten
cable connections in place.
1A-20
All manuals and user guides at all-guides.com
b
a
j h
(a)
are located on left at
(j)
in the bottom of the
c
50A 20A 50A 20A
g

1.21 Ground Connection

A ground connection
lugs. The unit must have this ground lug connected to a
good earthen ground for proper operating safety in com-
pliance with NEC and local standards.
G50/G70/G85
d
50A
1026SD87
(b)
is located next to the terminal
e
f