Electromagnetic Fields (Emf); Using The Appliance; Usage Restrictions - Philips PowerPro Aqua FC6402/01 Manual De Instrucciones

-
To prevent damage, never put wax, oil, floor maintenance products or liquid floor cleaners that are
not water-dilutable in the water tank.
-
Do not mix different types of liquid floor cleaner. When you have used one liquid floor cleaner,
first empty and rinse the water tank before you add another liquid floor cleaner to the water in
the water tank.
-
To prevent damage, do not use liquid floor cleaners that are not transparent or even milky.
-
Never exceed the maximum quantities mentioned on the bottle when you use a liquid floor
cleaner. Do not add more than a few drops to the water in the water tank, as this tank has a
capacity of 200ml.
-
Do not clean the metal wetting strip with a sharp object, as this may damage the strip. Only clean the
wetting strip by rinsing it under the tap. Replace the wetting strip when you can no longer clean it.
-
Replace the wetting strip only with an original strip. For ordering a new strip, see chapter
'Ordering accessories'.
-
Clean the water tank according to the instructions. The water tank is not dishwasher-proof.
-
Always switch off the appliance after use and when you charge it.
-
Never block the exhaust air openings during vacuuming.
-
Always use the vacuum cleaner with the filter unit assembled.
-
Make sure that the appliance is installed with the wall fixture mounted to the wall, according to the
instructions in the user manual.
-
Be careful when you drill holes in the wall to attach the wall fixture, to avoid the risk of electric shock.

Electromagnetic fields (EMF)

-
This Philips appliance complies with all applicable standards and regulations regarding exposure
to electromagnetic fields.

Using the appliance

Usage restrictions

-
Only use the water tank on hard floors with a water-resistant top coat (such as linoleum, enameled
tiles and varnished parquet) and stone floors (such as marble). If your floor has not been treated
to make it water-resistant, check with the manufacturer if you can use water to clean it. Do not use
the water tank on hard floors of which the water-resistant top coat is damaged.
-
Only use the water tank on linoleum floors that are properly affixed to prevent linoleum from being
drawn into the mopping nozzle.
-
Do not use the water tank to clean carpets.
-
Do not move the appliance with water tank assembled sideways, as this leaves water traces.
Only move forwards and backwards.
Note: Runtime duration depends on power level used during cleaning.
Using liquid floor cleaner in the water tank
If you want to add a liquid floor cleaner to the water in the water tank, make sure that you use a
low-foaming or non-foaming liquid floor cleaner that can be diluted in water. As the water tank has a
capacity of 200ml, you only have to add a few drops of liquid floor cleaner to the water.
English
7