Panasonic WV-CW7S Instrucciones De Operación página 2

ENGLISH VERSION
Features
This product is the smoked dome cover.
WV-CW7SN is applied with rain wash coating.
Precautions
Refer installation work to the dealer.
Installation work requires technique and experiences. Failure to observe this may cause fi re, electric
shock, injury, or damage to the product.
Be sure to consult the dealer.
Installations
The following are installation instructions using WV-S2531LN as a representative example. Refer to
manuals of each model upon installation.
Note:
• When the smoke type dome cover is used, the reach distance of IR will become shorter and
the ambient illuminance for the day & night switchover will become lower compared to the
standard clear type dome cover. Please reconfirm the performance after reinstalling the enclo-
sure to the camera.
Step 1
Remove the enclosure from the camera
body
Loosen the 4 enclosure fixing screws using the
bit provided with the camera, and then remove
the enclosure from the camera body.
Enclosure
Camera body
2
Enclosure fixing
screws (4 pcs.)
Step 2
Remove the dome cover
Remove the 3 dome cover fixing screws (2 with-
out washers, 1 with washer), and then remove
the dome cover holding plate, the light-blocking
sheet (WV-SFV631LT/ WV-SFV631L/
WV-SFV611L only), the dome cover and the
waterproof rubber from the enclosure.
(The Dome cover holding plate and the camera
body are connected with the installation auxiliary
wire. Please pay attention that the installation
auxiliary wire will be removed at the moment
when the dome cover fixing screws are
removed.)
Keep the removed dome cover holding plate,
the light-blocking sheet (WV-SFV631LT/
WV-SFV631L/ WV-SFV611L only), 3 fixing
screws until using them in step 3.