Standard Installation - Tripp-Lite B119-003-UHD Manual Del Propietário

Standard Installation

Connection
1 Optional: Attach the included mounting hardware to the unit, and
mount to a desired location.
2 Make sure power to all devices that you will be connecting is turned off.
3 Optional: Connect a DB9 cable between the RS-232 serial port on the unit
and the DB9 serial port on the computer you will be using to control it.
4 Connect an HDMI source device to an HDMI Input port on the switch.
Note: The length of the HDMI cable connecting the source to the switch must not
exceed 16 ft. (5 m).
5 Repeat step 3 to connect up to two more source devices to the
remaining Input ports on the switch.
6 Connect the HDMI Output port on the switch to the HDMI input port of
your display.
Note: The length of the HDMI cable connecting the switch to the display must not
exceed 16 ft. (5 m).
Connect the external power supply to the switch. Plug it into a Tripp Lite
7
surge protector, uninterruptible power supply (UPS) or power distribution
unit (PDU). The red LED on the unit will illuminate to indicate power is
being received.
01-071-93376A.indb 4
DVD
DVD
Display
DVD
HDMI Switch
4
2/7/2018 8:13:12 A