GRAPHITE 58G785 Instrucciones De Uso página 11

TRANSLATION OF
THE ORIGINAL INSTRUCTIONS
MIXER
58G785
NOTE: BEFORE THE POWER TOOL IS USED FOR THE FIRST TIME, READ
THIS INSTRUCTION MANUAL AND KEEP IT FOR FUTURE REFERENCE.
DETAILED SAFETY REGULATIONS
a) Use auxiliary handle(s), if supplied with the tool. Loos of
control can cause personal injury.
b) Hold power tool by insulated gripping surfaces, when
performing an operation where the cutting accessory may
contact hidden wiring or its own cord. Cutting accessory
contacting a "live" wire may make exposed metal parts of the
power tool "live" and could give the operator an electric shock.
c) Avoid touching rotating parts. Touching of rotating power tool
parts, equipment in particular, may cause body injury.
d) Wait until power tools comes to a complete stop before
putting it away. Working tool may jam and cause loss of control
over the power tool.
e) In case of working tool jam immediately switch off the power
tool, also be prepared for high reaction torque.
f) Do not use the mixer in environments with potentially
explosive atmosphere. Do not mix solvents or substance
containing solvents with ignition temperature below 210°C.
g) Do not wind the power cord around any part of the mixer
body.
h) Switch the mixer on and off only when the mixer paddle is
immersed in the tub.
i) Ensure the tub for mixing is well fixed.
j) Do not put your hands or any other objects into the tub when
mixing
CAUTION! This device is designed to operate indoors. The design
is assumed to be safe, protection measures and additional
safety systems are used, nevertheless there is always a small
risk of injuries at work.
Explanation of used symbols
1 2
5 6
Read instruction manual, observe warnings and safety
1.
conditions therein!
Protection class 2.
2.
Use personal protection measures (protective goggles, earmuff
3.
protectors, anti-dust mask).
Disconnect the device before repairs.
4.
5. Use protective clothes.
Protect the tool from moisture.
6.
Keep the tool away from children.
7.
8. Use protective footwear
CONSTRUCTION AND USE
Electric mixer is a power tool designed for continuous use in
construction industry and other fields. Possibility to use various
3 4
7 8
11
mixing tools appropriate for mixed substances allows for mixing of
cement, gypsum, stucco, paint, plaster, self levelling underlayment
and other chemicals. Amount of the product for a batch to mix
depends on ingredients and type of working tool used.
Use the power tool in accordance with the manufacturer's
instructions only.
DESCRIPTION OF DRAWING PAGES
Below enumeration refers to the device elements depicted on the
drawing pages of this manual.
Mixer spindle
1.
Switch
2.
3. Switch lock button
Carbon brush cover
4.
Wheel for rotational speed control
5.
6. Mixer shaft
Mixing paddle
7.
Gear switch
8.
* Differences may appear between the product and drawing
MEANING OF SYMBOLS
CAUTION
WARNING
ASSEMBLY / SETTINGS
INFORMATION
EQUIPMENT AND ACCESSORIES
Mixer shaft - 1 pce
1.
Mixing paddle - 2 pcs
2.
Flat spanner - 2 pcs
3.
PREPARATION FOR OPERATION
MIXING PADDLE ASSEMBLY
Disconnect the power tool from power supply.
The mixer is equipped with 2 mixing paddles for different
applications.
Pushing blades – designed for thin solutions, such as: paints,
gypsum plasters, structural paints.
Pulling blades – designed for thick solutions, such as: mortars,
concretes, glues with sand filling, gravel, expanded clay.
The right mixing blade must be used depending on the processed
solution.
• Screw the mixer shaft (6) into the mixer spindle (1) (fig. A).
• Screw the mixing paddle (7) to the shaft (6).
OPERATION / SETTINGS
SWITCHING ON / OFF
The mains voltage must match the voltage on the rating plate of
the mixer.
The mixer is equipped with the switch lock button (3) that protects
against accidental start up.
Switching on:
• Press the switch lock button (3) (fig. B).
• Press the switch button (2).
Switching off:
• Release the switch button (2).