Trouble Shooting - Grizzly MR 400 Traducción Del Manual De Instrucciones Original

Trouble Shooting

Problem
Device does not
start
Warning LED on
the control panel
lights up red
Warning LED on
the control panel
flashes red
Device rotates
incessantly on
the lawn area
Warning LED on
the control panel
lights up blue
Warning LED on
the control panel
flashes blue
Automatic lawn
mower moves,
but does not cut
Possible cause
On/Off switch (
"Off" ("0" position)
Rechargeable battery not in-
serted
Defective motor
Grass too long
Mower lifted up during opera-
tion
Boundary wire (
ed incorrectly, cut or damaged
Battery (21) temperature too
hot
Defective battery (21)
Automatic lawn mower tipped
over/overworked
Defective battery
Troubleshooting
Set the on/off switch (
5) set to
"On" (position "1") (see "Switch-
ing on and off")
Insert rechargeable battery (see
"Replacing the rechargeable bat-
tery")
Send the device in to the Service
Centre for repair
Pre-mow the lawn area if neces-
sary.
Set higher cutting height.
Start mower again (press OK
key)
Delete errors (press Stop key)
Check the connections on the
charging station
6) connect-
Check the boundary wire (
for possible damage
Allow the automatic lawn mower
to cool down for approx. 15 mins
Replace the battery (21) when
necessary
Turn mower over again
Check the height of the grass
(max 60 mm), pre-mow the lawn
area if necessary
Replace the rechargeable bat-
tery (see "Replacement parts/
accessories)
GB
5) to
6)
97