Trouble Shooting; Replacement Parts/Accessories - Grizzly ERM 1435 G Traducción Del Manual De Instrucciones Original

Trouble Shooting

Problem
Equipment
does not start
Motor stops
Result unsatis-
factory or mo-
tor labours
Blade fails to
turn
Strange nois-
es, rattling or
vibrations

Replacement parts/Accessories

If you do not have internet access, please contact the Service Centre (see "Grizzly Ser-
cice-Center"). Please have the order number mentioned below ready.
Spare blade ....................................................................................................... 13700211
Possible Cause
Power is off
Defective start lever (
18) or release button
( 17)
Worn carbon brushes
Defective motor
Grass too long
Blockage by foreign
object
Cut height too low
Blade ( 25) blunt
Blade ( 25) area
blocked
Blade ( 25) assem-
bled incorrectly
Blade ( 25) blocked
by grass
Blade screw ( 26)
loose
Blade screw ( 26)
loose
Blade ( 25) dam-
aged
Spare parts and accessories
can be obtained at
www.grizzly-service.eu
Fault Fixing
Check the socket, cable, wire and
plug and have any repairs carried out
by an electrician
Repair by customer services
Choose a lower cutting height
Remove the foreign object
Set a higher cut height
Have the blade sharpened or re-
place it
Clean the equipment
Install the blade correctly
Remove the grass
Tighten the blade screw
Tighten the blade screw
Replace the blade
GB
29