Important Safety Instructions - Remington R3150 Manual Del Usuario

página de 111

/ 111
Contenido
Tabla de contenido

Tabla de contenido

ENGLISH

CLEANING DAILY

Ensure the shaver is switched off and unplugged from the mains.

Open the shaver head by pressing the release button on the front of the shaver (Fig. H).

Tape out excess hair shavings (Fig. I).

Close head assembly (Fig. J).

CLEANING MONTHLY

Perform the daily cleaning steps ﬁrst

Open the shaver head by pressing the release button on the front of the shaver (Fig. I) and

ﬂipping open the head away from the body of the shaver (Fig. J).

Release the inner cutter carrier by rotating the locking arms counter-clockwise (Fig. M).

Pull the inner cutter carrier away from inner cutters (Fig. N).

Thoroughly brush hairs from the inner and outer cutters (Fig. P) and rinse out remaining

debris.

Replace inner cutter (Fig. O)

Place the inner cutter carrier back onto the upper hairpocket and lock in place by rotating

the locking arms clockwise until the arms ´click`into playe (Fig. Q-R).

CAUTION:

Never submerge your shaver in water.

CLEANING TRIMMER

Lubricate the teeth of the trimmer every six months with one drop of sewing machine oil.

Replacement Part No. SP-SFD2

WARNING – TO REDUCE THE RISK OF BURNS, ELECTROCUTION, FIRE,

OR INJURY TO PERSONS:

An appliance should never be left unattended when plugged in to a power outlet, except

when charging.

Keep the power plug and cord away from heated surfaces.

Make sure the power plug and cord do not get wet.

Do not plug or unplug the shaver with wet hands.

Do not use the product with a damaged cord. A replacement can be obtained via the

Remington

use and store the product at a temperature between 0°C and 32°C.

Only use the parts supplied with this appliance. Use of non Remington

product may give rise to a hazardous condition.

Do not submerge or place under running water.

Keep this product out of reach of children. The use of this appliance by persons with

reduced physical, sensory or mental capabilities or lack of experience and knowledge can

give cause to hazards. Persons responsible for their safety should give explicit instructions

or supervise the use of the appliance.

090250_REM_IFU_R3130_22L.indd 3