Maintenance - Dimplex Ignite 50 Serie Instrucciones De Instalación

Operation
R e m o t e C o n t r o l B a t t e r y
Replacement
1. Slide battery cover open on the
remote control.
2. Correctly install one 3 Volt
(CR2032 [longer life] or
CR2025) Battery in the
battery holder.
3. Close the battery cover.
Battery must be recycled or
disposed of properly. Check with
your Local Authority or Retailer
for recycling advice in your area.

Maintenance

WARNING: Disconnect power
and allow heater to cool before
attempting any maintenance or
cleaning to reduce the risk of
persons.
!
NOTE:
should not be operated with an
accumulation of dust or dirt on or in
the unit, as this can cause a build
up of heat and eventual damage.
For this reason the heater must
be inspected regularly, depending
upon conditions and at a minimum
yearly intervals.
Cleaning
cleaned in the factory during
the assembly operation. During
shipment, installation, handling,
may collect dust particles; these
can be removed by dusting lightly
with a clean dry cloth.
glass can be cleaned with a damp
should be completely dried with
a lint free cloth to prevent water
spots. To prevent scratching, do
not use abrasive cleaners.
15