Movement R5i Manual Del Propietário página 87

OPERATING INSTRUCTIONS
• "START / PAUSE" key: With the belt stopped, press the START key to turn on the belt.
When pressing the "START" key while the belt is moving, it will stop / pause.
• "STOP" key: with the conveyor moving, stop the conveyor slowly by pressing the
"STOP" key once. When the LCD display shows the message ERR, press the "STOP" key
to clear the message. , press the "STOP" key twice, and the treadmill stops immediately.
• "SPEED +" button: increases the speed with the moving belt. Increases the parameter
in the body fat test.
• "SPEED -" button: reduces the speed with the moving belt. Reduces the parameter in
the body fat test.
• "SPEED SHORTCUT" key: with the belt moving, increase the speed by pressing the
"SPEED SHORTCUT" key 4, 8, 12, 16.
" " Key: Reduce the inclination by pressing this key.
" " Key: Increase the incline by pressing this key.
"INCLINE SHORTCUT" key: Increase the slope directly SLOPE SHORTCUT by pressing the
quick incline key 3, 6, 9, 12.Key security functionIn any case, if the security key is pulled
out, the display shows: E7 and the alarm sounds. When the security key is reinserted, the
panel lights up for 2 seconds and goes into manual initialization mode (equivalent to a
complete reset).
INSTRUCTIONS FOR CONNECTING
• Connect the power cord to a 20A outlet. Place the switch in the "ON" position. The
screen had lit up and made a sound.
• Place the safety key in the correct position and connect the belt. The LCD display light
comes on and beeps. The belt enters Normal Mode P0.
• Press the "PROGRAM" key to select the program P0-P36, U1-U3; HRC1-HRC3; FAT.
a) "P0" user program. Press the "MODE" key to select the training mode. The user can
select the speed and incline. The standard speed is 1.0 km / h. The standard slope is 0%.
Training mode 1: Count. Time, distance, calories. The selection function is complete.
Training mode 2: Time countdown. In the selection, with the flashing time window,
press "+" or "-" to modify the value. The time range varies between 5-99minutes.
Standard and 30minutes.
Training mode 3: Distance countdown. In the selection, with the distance window
flashing, press "+" or "-" to modify the value. The distance range varies from 1.0-99.0
km. The default is 1.0 km.
33