Ibanez Troubadour T35 Manual Del Proprietário página 12

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 37
Troubleshooting
1. The power supply cannot be switched ON.
• Check that the power cable has been connected correctly.
• Try plugging it into a different power supply socket and see if the same prob-
lem occurs.
2. The power supply can be turned ON, but no sound is
produced.
• Check that the guitar and microphone have been connected correctly.
• Remove the effects between the guitar and the amplifier and check to see if no
sound is produced.
• Replace the shielded cable and check to see if no sound is produced.
• Check to see if the volume on the guitar is set to "0".
• Check to see if the microphone switch has been turned ON.
• Check to see if there are batteries in the guitar. If there are, check that they are
OK.
• Use a different guitar and see if no sound is produced.
• Check to see if the volume on the amp is set to "0".
3. Noise occurs
• Check to see if anything in the immediate vicinity is resonating or banging
against the amplifier to produce the noise.
• Check to see if the plug cover on the shielded cable is loose.
• Check that the string action (distance between strings and frets) is correctly
adjusted (not too low).
• Check to see if the guitar batteries are depleted.
• Is the microphone used as unbalanced? If so, noise occurs easily.
• Use another guitar, microphone, effects and cable to see if the same noise is
produced.
In the case of defects
This product has passed exhaustive inspections before being shipped from the
factory. Ensure that the above procedures are carried out when a problem is
thought to exist. Contact your dealer in the unlikely event that an abnormality oc-
curs during use. Also, ensure that the symptoms of the problem are explained in
detail when requesting repairs in order to facilitate swift handling.
10
Tabla de contenido
loading

Este manual también es adecuado para:

Troubadour t20Troubadour t10

Tabla de contenido