4/ Secure The Device On The Fixing Bar - Atlantic Panama A Serie Instrucciones De Instalacion Y De Uso

Secure the bar on the wall by
3
screwing the fastenings all the way
Pre-screw the 2 lower fastenings
leaving the screws protrude about
4
10mm.

4/ Secure the device on the fixing bar

Unscrew the 2
screws located
underneath the
1
device.
Disconnect the electrical cable harnesses which
connect the front and the back of the device by
pressing and pulling the connections.
The front may be set aside to install the back part of
3
the device on the fixing bar.
NB : According to the position of the connecting box,
complete the electrical connection before installing the
device on the wall (refer to page 11)
Insert the fixing bar in
openings located at the
4 back of the device by tilting
it.
Press on the top of the device so that it is secured on the fixing bar.
Screw the two lower screws all the way in order to lock the device on the wall.
6
2
Gently pull the bottom
of the front towards you,
then lift it and place it
gently on the side of the
unit by rotating it.
Bring the device back towards the
wall.
5 The lower fastenings previously
pre-screwed (refer to point 4, page
10) should be positioned into the
lower point of attachment.
8