Technical Services - ProctorSilex Commercial 78522 Manual De Instrucciones

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

16. Be sure the grinder is on a stable
work surface. Be sure all the
grinder feet are stable.
17. Do not let cord come in contact
with a hot surface. Do not
use on a hot surface. Check
if the voltage indicated on the
appliance corresponds to the
local voltage before you connect
the appliance.
18. Do not run grinder without meat
in the head. Severe damage to
the head and auger may occur.
19. Wear eye protection. Wear safety
glasses. Everyday eyeglasses
are not safety glasses. Safety
glasses conform to ANSI Z87.1
requirements.
NOTE: Approved safety glasses
have Z87 printed or stamped on
them.
20. Do not use outdoors.
21. Do not use appliance for other
than intended purpose.
22. Do not let cord hang over edge
of table or counter or touch hot
surfaces, including stove.
SAVE THESE INSTRUCTIONS
OTHER SAFETY INFORMATION
w WARNING
Electrical Shock Hazard: This appliance is provided with a
grounded (3-prong) plug to reduce the risk of electric shock. The plug fits only
one way into a grounded outlet. Do not defeat the safety purpose of the plug
by modifying the plug in any way or by using an adapter. If the plug does not
fit into the outlet, have an electrician replace the outlet.
The length of the cord used on this appliance was selected to reduce the
hazards of becoming tangled in or tripping over a longer cord. If a longer
cord is necessary, an approved extension cord may be used. The electrical
rating of the extension cord must be equal to or greater than the rating of the
appliance. The extension cord must be a grounding-type, 3-wire cord. Care
must be taken to arrange the extension cord so that it will not drape over the
countertop or tabletop where it can be pulled on by children or accidentally
tripped over.
If the cutting blade assembly locks and will not move, it will damage the
motor. Do not use. Call the toll-free customer service number for information.
For assistance or replacement parts, call our Technical Services number: +910-693-4277 or 1-866-285-1087
8 a.m. – 5 p.m. EST Monday – Friday
23. Do not attempt to operate the grinder
if the grinder itself is cold. The grinder
temperature should be at least 45
(7
o
24. The gear housing and the motor
cover may become hot during
operation. This is normal. Do not
touch these parts during operation or
until they cool after use.
25. WARNING: Busted, splintered bones
can get into the digestive tract of a
pet and cause severe damage, even
death by puncturing the walls of the
intestines or even the stomach.
26. This meat grinder is capable of
grinding smaller, softer animal bones
such as rabbit, whole chickens or
chicken quarters, and other birds,
due to both the power and all-metal
construction of the units.
27. Avoid grinding large, dense animal
bones as they are very difficult to
process (i.e., bones one would find in
large game, pigs, or cows).
28. Grinding knife is sharp. Handle
carefully.

Technical Services

www.hamiltonbeachcommercial.com
C) before beginning.
F
o
3
Tabla de contenido
loading

Tabla de contenido