Led Indicators - Axis 216FD Guia De Instalacion

Page 6
I/O terminal connector block
Pin Function
4 Transistor
Output
3 Digital Input
2 3.3V DC
1 GND

LED indicators

LED Color Description
Network Green Steady for connection to 100 Mbit/s network. Flashes for network activity.
Amber Steady for connection to 10 Mbit/s network. Flashes for network activity.
Unlit No connection.
Status Green Shows steady green for normal operation.
Note: The Status LED can be configured to be unlit during normal operation, or to flash only when
the camera is accessed. See the online help files for more information. Go to Setup > System
Options > LED settings
Amber Steady during startup, reset to factory default or when restoring settings.
Red Slow flash for failed upgrade.
Power Green Normal operation.
Amber Flashes green/amber during firmware upgrade.
All manuals and user guides at all-guides.com
Description
With a maximum load of 50mA and a maximum voltage of 24V DC, this output has an
open-collector NPN transistor with the emitter connected to the GND pin. If used with an
external relay, a diode must be
connected in parallel with the load, for protection against voltage
transients.
Connect to GND to activate, or leave floating (or unconnected) to
deactivate.
Can be used to power auxiliary equipment, max 50mA.
AXIS 216FD Installation Guide