BLACK&DECKER MS2000 Manual De Instrucciones página 6

Introduction
The MS2000 is a complete sanding kit that allows you to choose between 4 different
sanding configurations to do a variety of tasks. Combining the versatility with the Smart
Select feature, the sander gives you optimal results.
TM
Assembly
warning: Before assembly, make sure that the tool is switched off and
unplugged.
Removing sanding bases - figure B
• To remove the sanding base, press the
release button (3) and pull the base (6) off
the tool.
Random orbit sanding base
With this sanding base, you can use the tool as a random orbit sander.
Attaching the random orbit sanding base - figure C
• Hold the tool and the sanding base (4)
facing upwards as shown in figure C.
• Align the dust openings (9) in the sanding
base with the dust openings (10) in the tool
base.
• Press in on the sanding base until you hear
it click into place.
fitting sanding sheets - figure D
• Hold the tool with the sanding base (4)
facing upwards.
• Place the sanding sheet (11) onto the
sanding base (4) making sure the holes in
the sheet line up with the holes in the base.
B
c
4
9
10
d
4
6
6
3
9
11