Troubleshooting - BLACK&DECKER MS2000 Manual De Instrucciones

Ocultar thumbs

Contenido

Tabla de contenido

Idiomas disponibles

hints for optimum use

• For user comfort, the tool can be operated with one hand or

two as shown in figure M. Do not place your hands over the

ventilation slots.

• Do not exert too much pressure on the tool.

• Regularly check the condition of the sanding sheet. Replace

when necessary.

• Always sand with the grain of the wood.

• When sanding new layers of paint before applying another

layer, use extra fine grit.

• On very uneven surfaces, or when removing layers of

paint, start with a coarse grit. On other surfaces, start with a

medium grit. In both cases, gradually change to a fine grit for

a smooth finish.

Maintenance

Your tool has been designed to operate over a long period of

time with a minimum of

maintenance.

Continuous satisfactory operation depends upon proper tool

care and regular cleaning.

• Clear the cooling vents and slots with a clean, dry paint brush.

• Clean the housing with a clean, damp cloth. Do not use solvents.

Accessories

Recommended accessories for use with your tool are available at extra cost from

your local dealer or authorized service center. If you need assistance in locating any

accessory for your tool, please call 1-800-54-HOW-TO (544-6986).

wARNING: The use of any accessory not recommended for use with this tool could be

hazardous.

Problem

• Unit will not start.

• Circuit fuse is blown.

For assistance with your product, visit our website www.blackanddecker.com for the

location of the service center nearest you or call the BLACK & DECKER help line at

1-800-544-6986.