Safety Instructions - Kärcher SCP 16000 IQ Level Sensor Manual De Instrucciones

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 43
The warranty terms published by the relevant
sales company are applicable in each coun-
try. We will repair potential failures of your ap-
pliance within the warranty period free of
charge, provided that such failure is caused
by faulty material or defects in manufacturing.
In the event of a warranty claim please con-
tact your dealer or the nearest authorized
Customer Service centre. Please submit the
proof of purchase.
Symbols in the operating instruc-
Danger
Immediate danger that can cause severe
injury or even death.
Warning
Possible hazardous situation that could
lead to severe injury or even death.
Caution
Possible hazardous situation that could
lead to mild injury to persons or damage to
property.

Safety instructions

Danger of death
Violating these safety instructions may result
in death through electrocution.
 Check the power cord with mains plug for
damage before every use. If the power
cord is damaged, please arrange imme-
diately for the exchange by an authorized
customer service or a skilled electrician.
 All electrical sockets should be fixed in an
area that is protected against floods.
 Unsuitable extension cables can be haz-
ardous. Only use extension cables out-
doors which have been approved for this
purpose and labelled with a sufficient ca-
ble cross-section.
The plug and coupling of the extension
cable used must be spray watertight.
 Do not use the mains cable or the cable
of the level sensor to transport or fasten
the appliance.
14
Warranty
tions
 To separate the machine from the mains,
pull the plug and not the power cord.
 Do not scrape the power cord across
sharp edges and ensure that it does not
get pressed.
 The voltage indicated on the type plate
must correspond to the voltage of the
electrical source.
 To avoid risks, all repairs and replace-
ment of spare parts may only be carried
out by the authorised customer service
personnel.
 Follow the rules for electrical safety of
equipment:
Immersion pumps should be operated in
swimming pools, garden ponds and foun-
tains only using a earth-leakage circuit
breaker with a nominal leakage current of
max. 30 mA. Do not operate the pump if
there are persons located in the swim-
ming pool or the garden pond.
For safety reasons, we recommend that
you operate the appliance only via a
earth-leakage circuit breaker (max. 30
mA).
The electrical connection of the system
may only be performed by a qualified
electrician. Please follow the respective
national regulations!
In Austria pumps to be used in swim-
ming pools and garden ponds should be
equipped with a fixed connection line ac-
cording to ÖVE B/EN 60555 Part 1 to 3;
power supply should be via a ÖVE-tested
isolating transformer whereby the sec-
ondary nominal voltage should not ex-
ceed 230V.
 This device is not intended for use by per-
sons (including children) with reduced
physical, sensory or mental abilities or
lacking experience and/or knowledge,
unless they are supervised by a person
responsible for their safety or are instruct-
ed by these persons on the use of the de-
vice. Children should be supervised, to
ensure that they do not play with the de-
vice.
– 2
EN
Tabla de contenido
loading

Este manual también es adecuado para:

Sdp 18000 iq level sensor

Tabla de contenido