Idiomas disponibles
Idiomas disponibles
Please read all instructions carefully before assembly, installation and/or use of this product.
3
MOUNTING
TAB
ATTACH SHANK TO CARGO BASKET
• Place shank assembly onto the cargo basket lining up the four holes in shank assembly with the holes in the
four mounting tabs on the cargo basket.
• Install four 7/16 hex bolts and lock nuts as shown.
• Tighten all 7/16-14 GR5 bolts to 55 ft•lb
IMPORTANT NOTE
If the Cargo Carrier or cargo, blocks the license plate, you can mount the license plate directly to the back of
the cargo carrier using the two existing holes in the chrome support tubes. (screws not included)
LOADING
Load the Cargo Carrier so that most of the weight is in the center of the platform.
Cequent Consumer Products Inc
Solon, OH 44139 USA
Cequent Help Hotline: 1-800-234-6992
CORRECT
Cargo Carrier
Product Name:
Product Code:
SHANK ASSSEMBLY
LICENSE PLATE MOUNTING HOLES
Page 2
59502
CARGO BASKET
7/16 x 1.00" HEX BOLT
7/16 LOCK NUT
(4 PLACES)
INCORRECT
www.rolaproducts.com
59502N Rev A
4-5-05
