Tripp-Lite AVRX Serie Manual Del Propietário página 4

Features
1
1
Power Switch with Status Indicator:
• To turn the UPS ON, press the POWER SWITCH when the UPS is turned off. The switch LED will turn ON to confirm
the UPS is ON.
• To turn the UPS OFF, press the POWER SWITCH when the UPS is turned on. The switch LED will turn OFF to
confirm the UPS is OFF.
2
AC Input Cable: Connects to a SCHUKO-type AC input power source.
3
AC Input Circuit Breaker: Built-in circuit breaker protects the UPS from overload conditions.
4
Schuko CEE 7 Outlets: Provide both battery backup and surge protection. Plug your computer, monitor and other
critical equipment into these outlets.
Do not plug laser printers into these outlets.
5
Grounding Lug: Use this to connect any equipment that requires a chassis ground.
Automatic Voltage Regulation (Internal, Not Shown): Automatically adjusts fluctuations to incoming voltage (under/
over voltages) to supply connected equipment with 230V computer-grade output power. Automatic voltage regulation
functions separately from battery power (will not drain battery).
Keyhole Mounting Tabs (Bottom Panel, Not Shown): Use the bottom-panel mounting tabs to mount the UPS on any
flat surface.
4
4
2 3
5