GRAPHITE 59G801 Manual Del Usuario página 19

• During transportation the cutting blade must be covered with the
guard.
• If the saw is equipped with laser, replacement with laser unit of
another type is forbidden.
• Do not attempt to repair the saw by yourself.
• Repairs should only be carried out by qualified person in
authorized service workshop and with use of original spare parts.
• Make sure that upper part of the cutting blade is completely
guarded when operating in mitre saw mode.
CAUTION! This device is designed to operate indoors.
The design is assumed to be safe, protection measures and
additional safety systems are used, nevertheless there is
always a small risk of injuries at work.
Explanation of used symbols
1 2
5 6
Read instruction manual, observe warnings and safety
1.
conditions therein.
Use personal protection measures (protective goggles,
2.
earmuff protectors, anti-dust half mask).
Disconnect the power cord before starting maintenance or
3.
repair.
Keep the tool away from children.
4.
Protect against rain.
5.
Protection class 2.
6.
Keep hands away from the work area of the saw.
7.
Segregated waste collection.
8.
CONSTRUCTION AND USE
Flip over saw is designed for cutting wood and wood-like
materials. The tool can be used in table saw mode or mitre
saw mode. Quick and tool free change of function facilitates
operation. Output power allows to cut hard and soft wood,
chipboards and fibreboard. When operating in table saw
mode do not cut aluminium or other non-ferrous metals. Do
not use the saw for cutting firewood. Use the table saw only
with appropriate cutting blades with teeth with solid carbide
inserts. Flip over saw is designed for light duty works in service
workshops, repair and construction tasks and all individual,
amateur activities (tinkering).
Use the tool only in accordance with its purpose.
DESCRIPTION OF DRAWING PAGES
Below enumeration refers to the device elements depicted on
the drawing pages of this manual.
TABLE SAW (ITEMS)
Riving knife
1.
Cutting blade guard
2.
Work table
3.
Ripping fence
4.
Preview window
5.
Ripping fence fixing lever
6.
3 4
7 8
19
Switch
7.
Saw dust extraction insert
8.
Fixing holes
9.
Saw dust extraction outlet
10.
Knobs for lifting/lowering work table
11.
Spindle lock button
12.
Cutting blade
13.
Riving knife fixing screws
14.
Crosscut fence
15.
Mitre gauge slot
16.
Angle scale
17.
Angle indicator
18.
Locking knob of the mitre gauge
19.
Locking knobs of the crosscut fence
20.
Locking knob for angle setting
21.
Mitre gauge
22.
MITRE SAW (ITEMS)
31. Handle grip
32. Moving guard locking lever
33. Movable guard
34. Fence
35. Vertical clamp arm locking knob
36. Vertical clamp
37. Vertical clamp locking knob
38. Head tilt locking lever
39. Head locking pin
40. Turntable extension
41. Locking screw of table extension
42. Turntable
43. Angle scale of turntable
44. Turntable insert
45. Turntable lock button
46. Turntable locking knob
47. Dust extraction outlet
48. Stopping fender
49. Adjustment screw
50. Lock nut
51. Angular scale of head tilt
52. Adjustment screw for 90° angle
53. Nut
54. Adjustment screw for 45° angle
55. Nut
56. Screw
57. Cover
58. Fixing bolt for cutting blade
59. Outer flange
60. Carbon brush cover
* Differences may appear between the product and drawing.
MEANING OF SYMBOLS
CAUTION
WARNING
ASSEMBLY / SETTINGS
INFORMATION