Stand Alone-Mode - EuroLite AT-DIMM 3100 DMX Manual De Usuario

STAND ALONE-MODE

Manual - Manual RGB Setting
Under this point of the menu, you can set the RGB-values manually. In Manual-mode, the Manual LED
indicator lights up.
Roll - Selecting Built-in Programs
Under this point of the menu, you can select one of four programs, adjust its speed and adjust the speed of
the Strobe effect. In Roll-mode, the Roll LED indicator lights up.
Auto - Setting Speed
Under this point of the menu, you can set the Color-Change (SP), Strobe (FS) and Fade (FD) speed.
In Auto-mode, the Auto LED indicator lights up.
Press FUNC. The display indicates R000. Use UP and DOWN to set a
value for Red between 000 and 255. Press FUNC again to set values for
Green or Blue.
Press FUNC. The display indicates ro-1. Use UP or DOWN to select program
„ro-1" to „ro-4".
Press FUNC again, until the display indicates SP01. Now, use UP and
DOWN to set a speed between 01 (0.16 changes per second) and FL (6
changes per second) for the respective program.
Press FUNC once more, until the display indicates FS00. Now, use UP and
DOWN to set the speed in 25 Hz steps between 00 (no strobe) and 99 (0.5
Hz) for the Strobe effect.
Press FUNC. The display indicates SP01. Use UP and DOWN to set a
Color-Change (SP) speed between 01 (0.16 changes per second) FL (6
changes per second).
Press FUNC again, until the display indicates FD00. Use UP and DOWN to
set a Strobe (FS) speed in 25 Hz steps between 00 (25 Hz) and 99 (0.5 Hz).
18/36 70064175_V_1_1.DOC