Warnings; Emergency Operations In The Event Of Fire; Equipment Cleaning; Cleaning The Surfaces - CIBIN Alaska Manual

5.1.2 WARNINGS

Do not approach electrical parts with wet hands or bare feet.
Do not insert tools or other objects into the protection grids.
Do not remove safety devices (grids, decals, etc.) during maintenance operations.

5.1.3 EMERGENCY OPERATIONS IN THE EVENT OF FIRE

In the event of fire do not use water. Use an extinguisher to cool the affected area as quickly as possible.

5.2 EQUIPMENT CLEANING

5.2.1 CLEANING THE SURFACES

Use a damp cloth wherever possible to clean the outer or inner surfaces of the machine.
Do not use chemical agents and/or abrasive substances. Only use neutral detergents and lukewarm water.
Do not use tools that may scratch the surfaces and thus cause the formation of rust
Rinse with clean water and dry thoroughly.

5.2.2 CLEANING THE CONDENSER

This cleaning operation must be carried out by qualified per-
sonnel. For constant equipment performance, condenser clea-
ning must be carried out regularly to avoid the build up and
deposit of dirt, which will prevent the passage of air or water
(for water-cooled condensers).
Under normal conditions this operation should be carried out
every two months. Cleaning may be carried out more frequen-
tly according to the ambient conditions of machine use.
Cleaning can be carried out using the following: a screwdriver
and a long-bristled brush or better, compressed air.
Fig.5.2.2.b
80
Fig.5.2.2.a
Fig.5.2.2.c