Uneven surface
Avoid contact with moving parts. Do not insert
any body parts (e.g. finger) or objects through
the grill when the fan is operating.
Do not cover the grille, or operate in close
proximity to curtains, etc.
This product is intended for normal
domestic/household use only.
Always disconnect the fan when moving it
from one location to another.
The use of attachments or accessories not
recommended or sold by the product
distributor may cause personal or property
hazards or injuries.
Be sure fan is on a stable surface when
operating to avoid overturning.
Do not immerse in water.
Warning: once the fan is assembled, it's
forbidden to remove the guard.
READ AND SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE
Description
Maximum fan flow rate
Fan power input
Service value
Standby power consumption
Fan sound power level
Maximun air velocity
Measurement standard for service value
Contact details for obtaining more
information
19
Symbol
Value
Unit
15.01
3
F
m
/min
19.99
P
W
3
SV
0.75
(m
/min)/W
PSB
0.00
W
LWA
54.889
dB(A)
c
2.6
m/seg
IEC 60879:1986
(corr.1992)
El Corte Inglés S.A.
Hermosilla, 112 - 28009 Madrid · España
FEATURES OF THE PRODUCT
ASSEMBLY OF THE PRODUCT
Remove the locking nut.
Place the rear guard into position. If this is done correctly, the carry
handle will be at the top. Tighten the locking nut.
Install the fan blades on the spindle of motor.
Lift out all locking clips on the front guard.
Place the front guard into position and secure it by fastening the
clips over the outer rim. The screw and nut at the bottom of the grille
must be tight.
OPERATION OF THE PRODUCT
1. On / Off and Speed Control
The ON/Off and Speed is controlled by the Button Switch.
0 - The Fan is switched Off
1 - The Fan operates at the normal speed
2 - The Fan operates at the higher speed
2. Angle Adjustment
Switch off the fan. Slightly loosen the Adjusting Screw by turning it
anti-clockwise. Adjust the fan to the desired angle and then tighten the
Adjusting Screw by turning it clockwise.
20