Charge Your Headset - BlueAnt T2 ENDURE Manual Del Usuario

2
ish
Your headset has been given an initial partial charge to get started,
but for best results charge it using the supplied USB cable and
adaptor until the indicator light turns white.
on
> Charge the T2 whenever it announces that the battery is
> Your headset features Rapid Charge technology. It will charge to
50% capacity in just 30 minutes. A full charge takes about 2 hours.
> During charging, the indicator light fl ashes red.
> When the light goes white, the charge is complete.
> The T2 features an iPhone headset battery meter so you can check
your battery status at a glance.
T2_User_Guide_EN.indd 3

Charge Your Headset

USB Connector
(lift cover to access)
Very
Power
Switch
Low.
2/2/2012 7:19:42 PM