Important Notice; Operating Environment - Pioneer BDR-XS05 Manual De Instrucciones

BDR-XS05_CU_En.fm 3 ページ ２０１３年６月１３日 木曜日 午後１２時５２分
CAUTION
This product is a class 1 laser product, but this
product contains a laser diode higher than Class 1.
To ensure continued safety, do not remove any covers
or attempt to gain access to the inside of the product.
Refer all servicing to qualified personnel.
The following caution label appears on your unit.
CLASS 1
LASER PRODUCT
Location: Top of built-in drive and rear of outer
mounting case
CAUTION : USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE
SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
CAUTION : THE USE OF OPTICAL INSTRUMENTS WITH THIS PRODUCT WILL INCREASE EYE HAZARD.
For PLUGGABLE EQUIPMENT, the socket-outlet shall be installed near the equipment and shall be easily
accessible.

IMPORTANT NOTICE

RECORD THE MODEL NUMBER AND SERIAL NUMBERS OF THIS EQUIPMENT BELOW.
THE NUMBERS ARE ON THE BOTTOM.
BDR-XS05
MODEL NO.
SERIAL NO.
KEEP THESE NUMBERS FOR FUTURE USE.

Operating Environment

Operating environment temperature and humidity:
+5 °C to +35 °C (+41 °F to +95 °F); less than 85 %RH (cooling vents not blocked)
Do not install this unit in a poorly ventilated area, or in locations exposed to high humidity or direct sunlight (or
strong artificial light)
ここを開くとクラス 3B の可視レーザ放射及び不可視レーザ
放 射 が 出 ま す。 ビ ー ム の 目 又 は 皮 膚 へ の 被 ば く は 危 険！
見たり触れたりしないこと。
Location: Top of built-in drive
D3-4-2-1-8*_C_En
D6-8-2-1_En
D1-4-2-6-2*_A1_En
D3-4-2-1-7c*_A1_En