Idiomas disponibles
Idiomas disponibles
Remote Controller
Insert the thumbnail of your right hand into the Release Tab, and your index fingernail into
the Pull-Groove.
With your thumbnail, squeeze the Release Tab inwards whilst at the same time sliding the
battery holder out with your index fingernail.
OPERATING INSTRUCTIONS
Warning: Make sure the fan is fully assembled (and the grills are in place and locked)
before switching on.
1. Place your fan on a level and dry surface.
2. Plug the fan into a mains socket of suitable voltage and frequency (see Technical
Specifications for details)
3. Touch ON/OFF button to turn on the fan.
4. Choose the desired SPEED and MODE using the Control Panel or Remote Control buttons.
5. Use the TIMER button to set the desired turn-off time from 1-8 hours
6. Use the SWING button to start or stop oscillation.
7. Tilt Adjustment: To adjust the tile, hold the Main Body with on hand, push the Motor
Housing to desired vertical position with the other hand.
Caution: The fan should be always be switched off when making this adjustment.
CLEANING AND MAINTENANCE
Warning : Always unplug the appliance before cleaning.
1. Always disconnect the appliance from the mains by switching it off and removing the
plug from the power outlet before cleaning.
2. To clean the outer surface of the appliance, use a lightly damp cloth. Then, dry it
thoroughly with a soft, dry cloth before using again.
3. Do not allow water to penetrate the motor during cleaning.
4. Do not reconnect the unit until it is completely dry.
TECHNICAL SPECIFICATIONS
Model No.
Power supply
Power
Class II
DI-40HVF-3P2
220-240V~50Hz
55 W
GB-6
