Product Description And Specifications - Bosch Professional GDS 18 E Manual Original

14 | English
Product Description and
Specifications
Read all safety warnings and all in-
structions. Failure to follow the
warnings and instructions may re-
sult in electric shock, fire and/or se-
rious injury.
While reading the operating instructions, unfold
the graphics page for the machine and leave it
open.
Intended Use
The machine is intended for driving in and loos-
ening screws and bolts as well as for tightening
and loosening nuts within the respective range
of dimension.
Product Features
The numbering of the product features refers to
the illustration of the machine on the graphics
page.
1 Tool bit*
2 Tool holder
3 Suspension hook
4 Handle (insulated gripping surface)
5 On/Off switch
6 Thumbwheel for speed preselection
7 Rotational direction switch
*Accessories shown or described are not part of the
standard delivery scope of the product. A complete
overview of accessories can be found in our acces-
sories program.
1 609 929 Y31 | (8.2.11)
Technical Data
Impact Wrench
Article number
Rated power input
Output power
No-load speed
Rotational speed under
load
Max. torque for
hard/soft screwdriving
application according to
ISO 5393
Right/left rotation
Screw-Ø
Tool holder
Weight according to
EPTA-Procedure
01/2003
Protection class
The values given are valid for a nominal voltage [U] of
230 V. For different voltages and models for specific
countries, these values can vary.
Please observe the article number on the type plate of
your machine. The trade names of the individual ma-
chines may vary.
Noise/Vibration Information
Measured sound values determined according
to EN 60745.
Typically the A-weighted noise levels of the
product are: Sound pressure level 95 dB(A);
Sound power level 108 dB(A). Uncertainty
K =3 dB.
Wear hearing protection!
Vibration total values (triax vector sum) deter-
mined according to EN 60745:
Impact tightening of fasteners of the maximum
capacity of the tool: Vibration emission value
2
a =4 m/s , Uncertainty K=0.5 m/s
h
GDS 18 E
Professional
3 601 D44 0..
W 500
W 270
-1
min 800–1900
-1
min 500–1300
70–250/
Nm 50–160
M6–M18
½"
kg 3.2
/ II
2
.
Bosch Power Tools