Control Button - Axis V59 Serie Guia De Instalacion

• Risk of data loss and corrupted recordings. Do not remove the SD card while the product
is running. Disconnect power or unmount the SD card from the product's webpage before
removal.
This product supports SD/SDHC/SDXC cards (not included).
For SD card recommendations, see www.axis.com
Buttons

Control button

For location of the control button, see Product overview on page 8.
The control button is used for:
• Resetting the product to factory default settings. See page 14.
• Connecting to an AXIS Video Hosting System service or AXIS Internet Dynamic DNS
Service. For more information about these services, see www.axis.com.
Connectors
BNC connector
The BNC connector is used for connecting broadcast equipment using SDI. Connect a 75 Ohm
coaxial SDI cable.
CAUTION
The connector may be hot during normal operation in elevated ambient temperatures.
HDMI connector
TM
Use the HDMI connector to connect a display or public view monitor.
Network connector
RJ45 Ethernet connector.
NO TICE TICE
NO NO TICE
Due to local regulations or the environmental and electrical conditions in which the product
is to be used, a shielded network cable (STP) may be appropriate or required. All cables
connecting the product to the network and that are routed outdoors or in demanding
electrical environments shall be intended for their specific use. Make sure that the network
devices are installed in accordance with the manufacturer's instructions. For information
about regulatory requirements, see Electromagnetic compatibility (EMC) on page 4.
AXIS V59 Series
17
EN