Axis V59 Serie Guia De Instalacion página 10

AXIS V59 Series
1 Mounting bracket
2
Tripod screw
3
Outer mounting hole
4
Camera
5. Route and connect all cables to the camera.
NO NO TICE NO TICE TICE
Be careful not to stretch or bend the cables too much. This could cause damage to the
cables.
6. To avoid strain on the connectors and cables, fasten all cables to the mounting bracket
with cable ties.
7. Connect the power supply to a mains power outlet (100–240 VAC).
Drop Ceiling Mount
WARNING
The combined weight of the camera and mounting bracket is approximately 1.7 kg (3.7 lb.).
Make sure that the ceiling material is strong enough to support this weight.
NO NO NO TICE TICE TICE
The ceiling tile should be 5–60mm (0.2–2.4in.) thick.
1. Insert the SD memory card (optional).
2. Remove the ceiling tile in which the drop ceiling mount is to be fitted.
3. Drill a 7 mm (9/32 in) hole in the ceiling tile.
4. Remove the tripod screw from the mounting bracket.
10