Tabla de contenido
A.2.1.9
Certificados y homologaciones
Tabla A-8
Marcado
Tabla A-9
Marcado
Engineering Conditions of Acceptability
For use only in or with complete equipment where the acceptability of the combination is
determined by ULLLC. When installed in an end-product, consideration must be given to the
following:
• Reference temperatures on the unit enclosure were measured during heating test. The max
obtained temperature with condition C at Enclosure I was 81.5 °C. See chapter
"AUTOHOTSPOT" Additional Information for normal load condition details.
• The unit is completely encapsulated. Potting improve mechanical and thermal properties of
the unit.
• The following Production-Line tests are conducted for this product: Electric Strength,
Earthing Continuity
• The end-product Electric Strength Test is to be based upon a maximum working voltage of:
Primary-Earthed Dead Metal: 300 Vrms, 342 Vpk; Primary-SELV: 300 Vrms, 613 Vpk
• The following secondary output circuits are SELV: 24 Vdc output of the unit.
• The following secondary output circuits are at non-hazardous energy levels: 24 Vdc output.
SIMATIC RF300
Manual de sistema, 02/2021, C79000-G8978-C345-09
Homologaciones para la fuente de alimentación de rango amplio para sistemas SIMATIC RF
(Europa, GB): 6GT2898-0AC00, 6GT2898-0AC10
Descripción
Homologación CE según
•
2004/108/EG - EMC
•
2006/95/EG - Voltage directive
Homologación de radiofrecuencia para Rusia, Bielorrusia y Kazajistán
Homologaciones para la fuente de alimentación de rango amplio para sistemas SIMATIC RF
(EE. UU.): 6GT2898-0AC20
Descripción
Este producto dispone de certificados de aprobación UL para EE. UU. y Canadá.
Cumple los siguientes estándares de seguridad:
•
UL 60950-1
Information Technology Equipment - Safety - Part 1: General Requirements
•
CAN/CSA C22.2 No. 60950-1-07
Safety of Information Technology Equipment.
•
cURus +CB - UL/IEC 60950-1
and Limited power source under UL 1310
•
UL Report E 205089
Anexo
A.2 Accesorios
457
Tabla de contenido
