Lime Removing Feature (Self-Clean); Automatic Shutdown - Grundig SX 8570 Manual Del Usuario

OPERATION ______________________________
Lime removing feature
(Self-Clean)
It minimizes the lime particles accumulated in the
steam reservoir of your iron.
Use the self-clean feature once in every 2 to 3
weeks. If the water in your region is very hard
(if lime particles fall down from the soleplate
of the appliance), we recommend to use the self-
clean function more frequently.
1 U nplug your iron.
2
F ill in the water tank up to MAX level.
3 P lug in the appliance to a grounded wall socket
and set the temperature setting dial
4 U nplug the iron when the thermostat warning
light turns off.
J
5 Bring the product over the sink in horizontal posi-
tion and shake while pressing the descaling but-
ton " ". During this process, the water in the
F
water tank comes down into the steam genera-
tion reservoir quickly and is released through the
soleplate holes along with the lime particles
C
(if any).
6 When the entire amount of water is discharged
from the tank, release the self clean button
the iron still contains impurities, repeat this pro-
cess.
7
A fter the lime removal process is completed;
plug in the iron and make sure that the iron
soleplate is heated. When the iron reaches
C
to the adjusted ironing temperature, unplug
the appliance and gently iron on an old cloth.
Keep ironing until the water and lime stains left
on the soleplate
C
iron cools down before storing it.
Caution
Do not add vinegar etc. and other lime remov-
7
ing substances into the water tank.
to MAX.
B
are removed. Wait until the
Lime protection system
(Anti-Calc)
The lime protection system in the water tank of
your iron prevents clogging of the steam holes.
Lime protection system is always active and there
is no need to replace it.
C
Automatic shutdown
The 3-way safety shutdown switches off the ap-
pliance automatically if the iron is left on the sole-
plate or on its side for 30 seconds, or is left in
C
the vertical position for 8 minutes without being
moved.
- The thermostat warning light
show that the iron is switched off automati-
cally.
1
T o reheat the iron, lift it up and move it gently.
The thermostat warning light
2 W hen the temperature of the soleplate
under the set iron temperature, the thermostat
warning light
3
I f the thermostat warning light
after moving the iron, wait until it turns off again
before starting to iron.
. If
F
Note
If the thermostat warning light
7
nated after moving the iron, the soleplate
still at the required temperature and the iron is
ready to use.
J
turns off.
J
illuminates.
J
is illuminated
J
is not illumi-
J
ENGLISH
flashes to
falls
C
is
C
23