Setting The Temperature - Grundig SX 8570 Manual Del Usuario

OPERATION ______________________________
Preparation
1
R emove all packaging materials, labels and
protective foil and dispose of them according
to the applicable legal regulations.
2
C lean the outer parts of the appliance as de-
scribed in the section "Cleaning and care".
3
P lace the appliance on an even, stable, dry
and non-slip surface.
Notes
During the first use, a light odour may arise from
7
the iron. This ceases after a couple of uses.
The "CLICK" sound you hear during ironing, is
7
because of the anti-drip feature of your appli-
ance. This is a normal sound.
In order to generate steam, the soleplate
7
of your iron has to rise to a certain level of tem-
perature. By means of the "anti-drip" feature of
your iron, water dripping from the soleplate
of the iron shall be prevented until the soleplate
attains the temperature required.
Your product is intended for use with tap
7
water. If your tap water is excessively limy, we
recommend using a mixture of tap water with
purified water. Prior to ironing for the first time
fill twice and vaporize. Meanwhile, use the
steam burst frequently. In this way, both the
H
steam performance will improve and also the
dust particles which might have penetrated
through the steam channels will be cleaned up.
If water runs out during ironing, you can top
7
up water without waiting for the appliance to
cool down. But do not forget to unplug it before
topping up.
When spray does not squirt water, in order to
7
eliminate any possible blocking, close the spray
hole with your finger and press on the spray
button several times.
Caution
When your iron is filled with excessive water,
7
it may overflow. To avoid this, when you hold
your iron horizontally, make sure that the level
of water in the appliance does not exceed the
MAX. line.
Caution
Always read the care label on your garment
7
before setting the temperature.
1
S et the required ironing temperature. Do not
press the steam burst button
ing.
2
A fter ironing let the appliance cool down in a
location that is safely out of reach of children.
Filling in the water tank
1 A lways unplug the appliance.
2
O pen the water refill lid on
the pouring cup to fill the water tank up to the
MAX level.
3
C lose the water refill lid
C
Note
C
Even when ironing garments without steam;
7
water should be available in the appliance in
order to use the water spray
Do not fill the water tank with perfume, vinegar,
7
laundry starch, lime removers or other products
or chemicals which shall facilitate the ironing
process.
If your tap water is excessively limy, we recom-
7
mend to using a mixture of tap water with puri-
fied water.
Setting the temperature
1
A fter plugging in the iron, set required iron-
ing temperature by turning the temperature
setting dial
(please see the below table for temperature
setting).
2 T he temperature of your appliance can be in-
creased by turning the temperature setting dial
clockwise. For steam ironing temperature
B
setting dial
restricted with the steam mark.
during dry iron-
H
the iron. Use
E
.
E
.
D
to the appropriate position
B
should be in the range which is
B
ENGLISH 21