Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Fan Mode Optoins
1. Select Fan Mode by pressing the touch control.
2. Select low or high speed circulation by pressing the fan mode touch control.
The display will show:
Low speed
High speed
Oscillation
See oscillation instruction on page E5.
Timer
See timer instruction on page E5.
Auto Dim
After 1 minute of no interaction, the display lights will dim. This reduces the light from the product in
dark rooms. Press the power control to turn the unit OFF. The fan will briefly continue to run before
shutting down completely. When the unit is turned back on, the last settings used will resume.
Remote Control
1. The remote control uses one (1) CR2032 battery (included) for operation.
2. All the functions performed using the Remote Control work identically to the Manual Controls.
3. When in use, make sure to align the remote with the IR light (orange light) on the front of the unit.
NOTE: Remove the battery from the remote during storage or if not using for an extended period of time
otherwise battery may damage your remote control.
Battery Disposal - Please dispose of the used battery per municipal or provincial law.
SAFETY
TIP OVER SWITCH: This heater is equipped with a safety tip-over switch, which is located on the bottom
of the heater. This feature cuts the main power to the heater if it gets knocked over. If the heater does tip over,
simply stand it upright in order to resume operation.
THERMAL PROTECTION/RESETTING THE APPLIANCE: This heater includes an Overheat Protection
System that shuts the unit off when a potential overheat temperature is reached. If this occurs, the heater can
only resume its normal operation after resetting it.
To reset the heater:
1. Unplug the heater and wait 10 minutes for the unit to cool down.
2. After the 10 minutes, plug the unit in again and operate normally.
AUTOMATIC SHUT DOWN: When the machine is running without the timer function, it will automatically
shut down after 12 hours.
E-6
Cleaning
Always unplug the appliance before you clean it. Never immerse the appliance in water or any other liquid.
Never use aggressive or flammable cleaning agents such as bleach or alcohol to clean any part of the appliance.
1. Press the Power Button to turn the heater OFF and unplug the heater before moving or cleaning.
2. The debris screen can be removed and vacuumed.
• Open the screen door on the side of the unit by pulling the 2 tabs then removing the door.
• Vacuum any dust from the screen. If there is an extreme amount of dust on the screen, it can be removed
and gently hand washed with dish soap. Screen should be completely dry before returning to unit.
3. Interior dust can often be removed by using a vacuum cleaner with a crevice tool attachment.
4. Once cleaned, replace screen door.
Storage
1. Perform the cleaning procedures described above.
2. Wipe all parts dry.
3. Remove battery from remote during storage.
4. Store it in a cool, dry place. We recommend that you store the heater in its original carton.
TROUBLE SHOOTING GUIDE
PROBLEM
SOLUTION
Check to confirm manual power switch located on the back of the unit is turned ON.
If your heater fails to operate.
Make sure the electrical outlet or circuit breaker is working.
Check for obstructions. If you find an obstruction, turn the heater OFF,
and UNPLUG THE UNIT. Carefully remove the obstruction and follow the
reset instructions.
Check to confirm manual power switch located on the back of the unit is turned ON.
If the heater stops working.
Check fails to operate troubleshooting.
Check that unit is in heater mode and not fan mode.
Check to see if timer is set.
Check to see if temperature was set and has been met or is set for a
lower temperature in the room.
Touch buttons won't operate.
Check to confirm manual power switch located on the back of the unit is turned ON.
Be sure you are pressing the direct area of the icon selected.
UP/Down arrow touch buttons
The arrow buttons only work when the temperature control or timer control
not operating.
has been selected. Be sure you are pressing the direct are of the arrow icons.
Fan temporarily stays on to cool unit down.
Unit won't turn off.
Orange light stays on unless unit unplugged or the manual power switch is turned OFF.
Remote doesn't operate.
Change the battery with new and same type if the remote control
does not operate well.
E-7
Tabla de contenido
