Battery Replacement - Ideal 61-532 Manual Del Usuario

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Locating a Circuit Breaker or Fuse using the TL-532A Alligator Clip lead Set
WARNING
Arc Flash and Shock Hazard, Proper PPE Required. Follow all safety procedures, wear proper PPE in accordance to NFPA 70E. Read and fully
understand the instructions below prior to using this product. Failure to comply can result in serious injury or death.
WARNING
Shock Hazard, wear proper PPE in accordance to NFPA 70E. Do not touch the metal alligator clips on the TL-532A Lead set when attaching to live
conductors. Keep your fingers on the protective hood. Failure to comply can result in serious injury or death.
1. Insert the 61-532 transmitter prongs into the plug at the end of the TL-532A Lead Set.
2. Carefully attach the black alligator clip to the white (Neutral) conductor, making sure your fingers stay on the protective hood of
the alligator clip. DO NOT TOUCH THE METAL ALLIGATOR CLIP!
3 Carefully attach the red alligator clip to the black (Hot) conductor, making sure your fingers stay on the protective hood of the alligator clip. DO
NOT TOUCH THE METAL ALLIGATOR CLIP!
4. The LED at the end of the transmitter will verifying the presence of power.
5. Follow the procedure described in Locating a Circuit Breaker or Fuse, steps 3 through 7.

Battery Replacement:

Unscrew and remove battery cover. Insert new 9V battery into battery compartment and re-install battery cover.
Clean with a dry cloth.
Specifications:
Operating Voltage: 100-140VAC
Operating Frequency: 57-63Hz
Maximum Load: 18A (4ms) at 120VAC, 200mW max, at 120VAC
Duty Cycle: Max: 4mS every 16.6mS (continuous), (.24%)
Weight (excluding battery): Transmitter approx 50gr., Receiver approx. 85 gr.
Power Supply: 9VDC battery
Operating Storage Temperature: 0 to 50ºC
Complies with UL 1436 and CSA C22.2 No. 160
Disposal of Waste, Electrical & Electronic Equipment
In order to preserve, protect and improve the quality of the environment, protect human health and utilize natural resources prudently and ratio-
nally, the user should return unserviceable product to relevant facilities in accordance with statutory regulations. The crossed-out wheeled bin
indicates the product needs to be disposed separately and not as municipal waste.
Do not dispose of this product as unsorted municipal waste. It must be properly disposed of in accordance with local regulations. Please see www.
epa.gov or www.erecycle.org for additional information.
Disposal of Used Batteries/Accumulators
The user is legally obliged to return used batteries and accumulators. Disposing used batteries in household waste is prohibited! Batteries/accu-
mulators containing hazardous substances are marked with the crossed-out wheeled bin. The symbol indicates that the product is forbidden to be
disposed via domestic refuse. The chemical symbols for the respective hazardous substances are Cd = Cadmium, Hg = Mercury, Pb = Lead.
You can return used batteries/accumulators free of charge to any collecting point of your local authority, our stores, or where batteries/accumula-
tors are sold. Consequently, you must comply with your legal obligations and contribute to environmental protection.
You can return used batteries/accumulators free of charge to any collecting point of your local authority, our stores, or where batteries/accumula-
tors are sold. Consequently you comply with your legal obligations and contribute to environmental protection.
TWO YEAR LIMITED WARRANTY
This tester is warranted to the original purchaser against defects in material and workmanship for a period of two (2) years from date of purchase.
With proof of purchase from an authorized IDEAL distributor, a defective tester will be repaired or replaced with the same product or a function-
ally equivalent product, at the option of IDEAL INDUSTRIES, INC. during the warranty period, subject to verification of the defect or malfunction.
Warranty does not cover consumables such as fuses, batteries, and excludes defects caused by leakage from batteries, abuse, mishandling, drop-
ping, ordinary wear and tear, misuse, neglect, unauthorized repair, improper use, alterations, accidents or any causes beyond IDEAL's reasonable
control. Consequential or incidental damages are not recoverable under this warranty. Some states do not allow the exclusion or limitation of
incidental or consequential damages, so the above limitation or exclusion may not apply to you. This LIMITED WARRANTY gives you specific
legal rights, which vary from state to state. This warranty constitutes the sole and exclusive remedy of the purchaser and the exclusive liability of
IDEAL, and is in lieu of any and all other warranties, and expressly disclaims all other warranties, implied, or statutory as to merchantability, fitness
for purpose sold, description, quality productiveness, or any other matter. No agent, distributor or other supplier has the authority to modify or
amend this warranty or make other representations or warranties other than those contained in this warranty without express written authorization
from IDEAL. For warranty service, call IDEAL customer service at 1-800-435-0705.
IDEAL INDUSTRIES, INC.
Sycamore, IL 60178, U.S.A.
800-435-0705 Customer Assistance
www.idealind.com
ND 5415-5
Made in China
Tabla de contenido
loading

Tabla de contenido