Ideal Vol-Con XL Manual De Instrucciones

Ideal Vol-Con XL Manual De Instrucciones

Probador de voltaje/continuidad y probador de voltaje
Ocultar thumbs Ver también para Vol-Con XL:
Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

Vol-Con
XL (61-086)
®
Voltage/Continuity Tester
and Vol-Test™ (61-085)
Voltage Tester
Instruction Manual
Register your product and access more
information at www.idealindustries.com
Read First: Safety Information
Understand and follow operating
instructions carefully. Use the tester and
test leads only as specified in this manual;
otherwise, the protection provided by the
tester can be impaired.
WARNING
To avoid possible electric shock,
personal injury or death, follow these
guidelines:
• Do not use if tester appears damaged.
Visually inspect the tester to ensure
case and is not cracked.
• Inspect and replace test leads if
insulation is damaged, metal is
exposed, or probes are cracked. Pay
particular attention to the insulation
surrounding the connectors.
• Always ensure the tester, test leads
and all accessories meet or exceed the
measurement category required in the
working environment. (i.e. CAT rating)
#61-085
• Note that the measurement category
#61-086
and voltage rating of combinations
of the tester, the test leads, and
the accessories is the lowest of the
individual components.
• Do not use tester if it operates
abnormally as protection maybe
impaired.
• Do not use during electrical storms or
in wet weather.
• Do not use around explosive gas, dust,
vapor, amperage or in damp or wet
environments.
• Do not apply more than the rated
voltage to the tester.
• Remove the test leads from the input
jacks before measuring current.
• Remove the test leads from the meter
prior to removing battery cover. (61-086)
• Do not use without the battery and
battery cover properly installed. (61-086)
• Do not attempt to repair this unit as it
has no user-serviceable parts.
• Never ground yourself when taking
electrical measurements.
• Connect the black common lead to
ground or neutral before applying
the red test lead to potential voltage.
Disconnect the red test lead from the
voltage first.
• When using the probes, keep fingers
behind the guard rings of the probe
tips.
• Voltages exceeding 30VAC or 60VDC
pose a shock hazard so use caution.
- 2 -
Tabla de contenido
loading

Resumen de contenidos para Ideal Vol-Con XL

  • Página 8 • Al usar las sondas, mantenga los dedos accesorios cumplan o excedan la categoría detrás de los anillos protectores en las de medición necesaria en el ambiente de puntas de las sondas. trabajo. (Por ejemplo, clasificación CAT) • Los voltajes superiores a 30 VCA o 60 •...
  • Página 9: Características

    una indicación de voltaje de reserva para Riesgo. Información Importante. mayor seguridad. Vea el Manual. • Dispositivo de medida de baja impedancia Voltaje peligroso. • Cables de prueba reemplazables Se permite la aplicación y el retiro • Puntas de sondas blindadas de alrededor y de Conductores •...
  • Página 10 automáticamente a la modalidad de indi- cación de voltaje. • Pruebe si existe continuidad conectando el probador al circuito. Indicador • Si el circuito tiene una resistencia de 500kW o menos, se oye una indicación audible y se enciende el LED de con- tinuidad.
  • Página 11: Reemplazo De Las Pilas: (61-086 Sola- Mente)

    corriente de 25 ciclos. La corriente de 60 Repita la misma prueba de arriba en el ciclos viene indicada por un zumbido de circuito trifásico. Una indicación de que mayor frecuencia y vibraciones más rápi- no hay voltaje o que es menor que el das.
  • Página 12: Mantenimiento

    Altitud: 2000m Uso interior Observe que los cables de prueba Pila: (4) 1.5V (IDEAL No. 61-201, IEC No. TL-80 y TL-82 sólo se pueden usar LR44, o NEOA No. 1166A). específicamente con los probadores el Duración de las pilas: 200 horas típico...
  • Página 13: Aislamiento Doble

    IDEAL INDUSTRIES, INC. reemplaz- (61-086) et testeur de ará o reparará la unidad defectuosa, a la sola tension Vol-Test™ (61-085) opción de IDEAL, sujeto a la verificación del defecto o falla. Mode d’emploi Esta garantía no cubre fusibles, baterías o Enregistrez votre produit et accédez...

Este manual también es adecuado para:

Vol-test61-08561-086

Tabla de contenido