Valeo beep&park Manual De Instrucciones página 4

Technical Parameters / Rearview camera
•
Type/Mode: OSD camera
•
Video standard: PAL
•
Voltage: DC 12V
•
Power consumption: Approx 0.8W (Max.)
•
Graphic sensor: 1/3" color sensor
•
Picture element: 628 (H) x 586 (V)
•
Horizontal resolution: 400 TV lines
•
Minimum illumination: <2 Lux
•
View angle: 133°x108°x78° (DxHxV)
•
Operation temperature: Camera -30°C ~ +80°C
Technical Parameters / Display
•
Size : 2.48''
•
Display format : 640 (H) x 240 (V)
•
Number of pixels : ~150 000
•
Video mode : NTSC/PAL
•
Working current < 250 mA
•
Static current < 10 mA
•
Working temperature : -10°C ~ +60°C
4
Caution
•
It is recommended that installation is carried out
professional auto technician.
•
It is strongly advised to check the position of the sensors before the
defi nitive drilling of the holes.
•
beep&park®/vision™ helps provide assistance when reversing and
parking. Driving skills, such as slowing down, use of mirrors etc. are
always essential.
•
To ensure clear view, please keep the camera lens clean and keep it
away from sharp items.
•
Heavy rain, dirt on the camera or a damaged sensor may cause blurred
vision.
•
It is not recommended to paint the sensors included in this kit. If you
would like the sensors to be the same colour as your vehicle, choose
paintable sensors, available as spares.
•
Depending on the bumper's design, you must sometimes add angle
correction rings for installation around the sensors to obtain the correct
angle: +/- 5° from the perpendicular.
•
On metal bumpers, you must sometimes add insulating rings around the
sensors to fi t them on the bumper, in order to avoid sensor vibration.
•
The use of fi tting ring may be requested to adjust the angle of the
camera.
•
If you wish to connect the system to an original navigation system, please
refer to your auto technician.
•
On some vehicles equipped with
many onboard electronic devices,
it is may be necessary to add a
power relay.
•
Please ensure waterproofness of
the camera in case it would be
fi tted outside the bumper.
by an approved