Polyethylene Tank Information - Parker Chelsea URP50 El Manual Del Propietario

Bulletin HY25-1793-M1/US
Safety Information
Polyethylene Tanks Information
WARNING: This tank is molded from polyethylene material.
The black color provides for maximum ultra-violet resistance. The
maximum operating temperature is 180 degrees Fahrenheit. Oper-
ating in hydraulic fluids above this temperature may result in tank
deformation or sag and possible inner tank surface detachment.
This reservoir is designed for dump trailer applications with a maxi-
mum hydraulic cycle time of less than 5 minutes. Longer running
time may result in excessive heat build-up and subsequent dam-
age.
Rotating Auxiliary Driveshafts
WARNING:
■ Rotating auxiliary driveshafts are dangerous. You can snag
clothes, skin, hair, hands, etc. This can cause serious injury or
death.
■ Do not go under the vehicle when the engine is running.
■ Do not work on or near an exposed shaft when the engine is
running.
■ Shut off the engine before working on the Power Take-Off or
driven equipment.
■ Exposed rotating driveshafts must be guarded.
Guarding Auxiliary Driveshafts
WARNING: We strongly recommend that a Power Take-Off
and a directly mounted pump be used to eliminate the auxiliary
driveshaft whenever possible. If an auxiliary driveshaft is used
and remains exposed after installation, it is the responsibility of
the vehicle designer and P.T.O. installer to install a guard.
This symbol warns of possible personal injury.
Owner's Manual
URP50 Tank
2
Parker Hannifin Corporation
Chelsea Products Division
Olive Branch, MS 38654 USA